Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Solutions to common spray finish problems
http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=45738		 Page 1 of 1
Author:  B. Howard [ Mon May 18, 2015 1:31 pm ]
Post subject:  Solutions to common spray finish problems
Here is a link to a handy chart I made that covers solutions to most common problems encountered when spraying finish.

http://howardguitars.blogspot.com/2015/ ... rt_18.html

And while you're there if you haven't already, check out the rest of my blog.
Author:  meddlingfool [ Mon May 18, 2015 5:33 pm ]
Post subject:  Re: Solutions to common spray finish problems
Good data!

Reaffirms my decision to contract out...;)
Author:  Alex Kleon [ Mon May 18, 2015 6:45 pm ]
Post subject:  Re: Solutions to common spray finish problems
When I first saw the topic, I thought someone was looking for some answers, and I though to myself, hopefully Brian Howard will help out. Then I read it! laughing6-hehe
Thanks for posting this, Brian. [clap]

Alex
Author:  Joe Beaver [ Mon May 18, 2015 6:55 pm ]
Post subject:  Re: Solutions to common spray finish problems
[:Y:] [:Y:] [:Y:] Very interesting stuff on your blog. Well done !!! And thank you
Author:  uvh sam [ Mon May 18, 2015 7:38 pm ]
Post subject:  Re: Solutions to common spray finish problems
So let me get this straight, if your having finish problems it is either you are going too fast or too slow, you are either too far away with the gun or too close, it's too hot, it's too cold, too humid, too dry, your mixture is too thin, your mixture is too thick or it's the second Saturday of a month ending in y
All you have to do is do it right and you'll be ok :)
Author:  Dave Rickard [ Mon May 18, 2015 9:31 pm ]
Post subject:  Re: Solutions to common spray finish problems
Good stuff on your blog. Thanks for sharing
Author:  Glenn_Aycock [ Mon May 18, 2015 9:55 pm ]
Post subject:  Re: Solutions to common spray finish problems
Great blog, Brian! Lots of useful information there. I need to start updating mine again...
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/